‧DC‧SD3828PT

38x38x28mm / 1.5x1.1inch

24~13 CFM

Plastic Impeller

	Rated Volt	Voltage Range	Input Power	Rated Current	Ref. Speed	Max.Airflow		Max.Static Pressure		Noise Level	PQ Curves	UL
Model No	VDC	VDC	Watt	Amp	RPM	CFM	m3/min	Inch/H2O	mm	db(A)
SD3828PT-12SHH**	12	7~13.2	12	1.0	19000	24	0.7	2.1	53.34	62	1	R
SD3828PT-12SH**	12	7~13.2	9.84	0.82	18000	22	0.6	1.87	47.5	60	2	R
SD3828PT-12HHH**	12	7~13.2	6	0.5	13000	17	0.5	1.02	25.91	48	3	R
SD3828PT-12HH**	12	7~13.2	3.6	0.3	12000	15.5	0.4	0.91	23.11	47	4	R
SD3828PT-12H**	12	7~13.2	2.52	0.21	11000	14	0.4	0.8	20.32	45	5	R
SD3828PT-12M**	12	7~13.2	1.8	0.15	10000	13	0.4	0.7	17.78	42	6	R
SD3828PT-24SHH**	24	14~26.4	12	0.5	19000	24	0.7	2.1	53.34	62	1	£
SD3828PT-24SH**	24	14~26.4	9.84	0.41	18000	22	0.6	1.87	47.5	60	2	£
SD3828PT-24HHH**	24	14~26.4	6	0.25	13000	17	0.5	1.02	25.91	48	3	£
SD3828PT-24HH**	24	14~26.4	3.6	0.15	12000	15.5	0.4	0.91	23.11	47	4	£
SD3828PT-24H**	24	14~26.4	2.52	0.105	11000	14	0.4	0.8	20.32	45	5	£
SD3828PT-24M**	24	14~26.4	1.8	0.075	10000	13	0.4	0.7	17.78	42	6	£

** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing Sinwan reserves the right to change data and improve electrical & mechanical design without notice, data tolerance +-10%


	Motor Type:	DC Motor

	Burnout Protection:	Electronically protected, polarity protected

	IP Protection:	IP55, IP67 (Optional)

	Frame:	Glass fiber reinforced thermoplastic, rated UL94V-0

	Impeller:	5 blades, glass fiber reinforced plastic, rated UL94V-0

	Bearing:	Two ball bearings

	Rotation:	CCW seen on rotor

	Connection:	Wire lead or terminal flat pin connecting

	Weight:	42g

	Dielectric Strength:	500 VAC/min. Max leakage 0.5mA

	Speed Control:	Optional: PWM, S/C NTC thermister

	Signal Output:	Optional: RD Rotation Detactor, FG Frequency Generator

	Operating Temp:	-20C~+65C

	Storage Temp:	-20C~+75C (at 65%RH)

	Life Expectancy:	L10 - B:70K hours at 40C / Y:50K hours at 40C