‧AC‧PFA250HAN
Dia.250x94mm/9.8x3.7inch
Max.650CFM
AC Centrifugal Fan,Motorized Impeller,Backward curved blades
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
PFA250HAN11-2** 115 100~120 50/60 103/142 2600/2700 620/650 17.6/18.4 2.2/2.7 55.88/68.58 73/75 2/1 R
PFA250HAN22-2** 230 200~240 50/60 106/148 2600/2700 620/650 17.6/18.4 2.2/2.7 55.88/68.58 73/75 2/1 R
  • ** = "WB" for wire leads type, Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Outer rotor, capacitor induction
      Burnout Protection: Thermally protected
      IP Protection: IP54
      Frame: Aluminum die cast, natural treatment
      Impeller: Impeller & flange glassfiber reinforced PA66
      Bearing: Ball bearing
      Rotation: CW seen on rotor
      Connection: Wire leads (UL1015, #22 AWG)
      Weight: 2,090g
      Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60Hz
      Insulation Resistance: Over 100M Ohm at DC 500V
      Signal Output: Optional: RD, FG
      Operating Temp: -20C~+70C
      Storage Temp: -40C~+80C (at 65%RH)
      Life Expectancy: L10 70K hours at 25C

     

    Inlet nozzle/Duct ring
    DR250SN