‧AC‧S162SAP
172x150x51mm/6x2inch
215 CFM
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
S162SAP-11-1 115 60~130 50/60 30/26 2600/2900 190/215 5.4/6.1 0.49/0.45 12.45/11.43 47 2/1 £
S162SAP-11-2 115 60~130 50/60 24/20 2300/2400 165/175 4.7/5 0.42/0.38 10.67/9.65 40 4/3 £
S162SAP-11-3 115 80~130 50/60 18/16 1600/1500 120/110 3.4/3.1 0.31/0.26 7.87/6.6 32 6/5 £
S162SAP-22-1 230 120~260 50/60 30/26 2600/2800 190/215 5.4/6.1 0.49/0.45 12.45/11.43 47 2/1 £
S162SAP-22-2 230 130~260 50/60 24/20 2400/2200 175/160 5/4.5 0.45/0.35 11.43/8.89 40 4/3 £
S162SAP-22-3 230 150~260 50/60 18/16 1600/1500 120/110 3.4/3.1 0.31/0.26 7.87/6.6 32 6/5 £
S162SAP-22-1(240) 240 120~280 50/60 30/26 2600/2900 190/215 5.4/6.1 0.49/0.45 12.45/11.43 47 2/1 £
S162SAP-11/22-1
dual voltage 		115
230 		60~130
120~250 		50/60 30/26 2600/2900 190/215 5.4/6.1 0.49/0.45 12.45/11.43 47 2/1 £
S162SAP-11/22-2 115
230 		70~120
130~250 		50/60 24/20 2200/2400 163/175 4.6/5 0.41 /0.37 10.41/9.4 40 4/3 £
S162SAP-11/22-3 115
230 		80~140
150~260 		50/60 18/16 1600/1500 120/110 3.4/3.1 0.31 /0.26 7.87/6.6 32 6/5 £
-Optional Function Leads:

  • Tachometer,speed sensor pulses 5V, input 4.5~27 VDC,1 signal each revolution, or 2 signals each revolution
    available on request. Function-F/G

  • AC Alarm Fan, DC Power supply alarm output, open collector or TTL available. Function-R/D Alarm DC input

  • Fan abnormal speed alarm, Programmable CPU AC Power alarm output,open collector or TTL available on request. Function-R/D Programmable CPU Alarm

  • AC Fan Dual Voltage Wiring Diagram : AC Fan Dual Voltage 115VAC/230VAC

  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole, inner rotor, single phase, impedance protected design
      Burnout Protection:
      IP Protection:
      Frame: Aluminum die-cast, black color cosmetics
      Impeller: Glass fiber reinforced thermoplastic impeller, rated UL94V-0
      Bearing: Two high precision permanently lubricated ball bearings
      Rotation: CW looking at rotor, air inlet side of housing, air outlet from struts
      Connection: Wire lead or Terminal flat pin connecting for choice
      Weight: 1300g (2.8Lbs)
      Dielectric Strength: Over 1 min.at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 Mega Ohm at DC 500V
      Signal Output:
      Operating Temp: Ambient non-condensing allowable thermal range -20C~+70C
      Storage Temp:
      Life Expectancy: Indoor free air running test MTBF 90K hours at 35C, 40K hours at 60C

     
  • Metal Fan Guard: G172-10H, G172-10HA
  • Plastic Fan Guard: G172P
  • Plastic Fan Filter: GRM172-30, GRM172-45
  • Metal Fan Screen: MF172S-30N
    		•